[Date Prev]   [Date Next] [Thread Prev]   [Thread Next] [Date Index]   [Thread Index]


     [snips-users] Thresholds in snmpgeneric


I have a problem with snmpgeneric in snips-1.1:

While this config works fine:

TEMP . TEMP public 26 28 30

This one doesn´t work:

PRI . STATUS public 2 2 2

It seems that snips can´t handle the case when the thresholds for
warning, error and critical are equal although otherwise indicated
in the sample-config. The output goes to "critical" for any
snmpget-output, even if it is just "1".

What I want to reach is to have an OK for output "1" and a
CRITICAL for anything higher.

Gruss / Best regards  |  LF.net GmbH        |  fon +49 711 90074-27
Michael Dipper        |  Ruppmannstr. 27    |  fax +49 711 90074-33
md at LF net             |  D-70565 Stuttgart  |  http://www.lf.net

Zyrion Traverse Network Monitoring & Network Management Software