On Monday 25 April 2005 09:52 am, Allan P. Magmanlac wrote:
> Thanks for the reply. I was able to find the full correct identifier and
> it's working now.
>
> Also, is there a way I can use snips package to monitor if all the lines
> in the dts are busy. Users use up all the lines by dialing in.
> Or is there a way I can use snips to determine the number of users who
> are currently dialed in to our dialup terminal server?
looks like modemmon dos that. unfortunatelly it doesn't use SNMP
# Modemmon reads a list of cisco terminal servers to monitor (from
# a config file) and thresholds. It then logs into the cisco's and
# counts the number of lines in use. When the used lines exceeds the
# thresholds, the lines are displayed in SNIPS data format.
# Requires the 'rcisco' program for logging into the cisco specified.
# Identifies dialin lines from the description field of the lines.
>
> Russell Van Tassell wrote:
>
> >On Fri, Apr 22, 2005 at 11:05:39AM -0400, Allan P. Magmanlac wrote:
> >
> >
> >>Hello,
> >> I'm trying to query our dialup terminal access server using snmp
> >>packages that comes with snips.
> >>It works from the command line.
> >>server# ./snmpget dts.fakedomain.ca fakecommunity system.sysUpTime.0
> >>Name: system.sysUpTime.0 -> Timeticks: (34057798) 3 days, 22:36:17
> >>
> >> [...]
> >>
> >>I modified a little bit the snmpmon-collector...
> >>$MIBENTERPRISE = ".iso.org.dod.internet.private.enterprises"
> >>In the "sub init_system" I specified
> >>my $prefix = "$MIBENTERPRISE"
> >>
> >> [...]
> >>
> >>My question is what is the full correct identifier for system.sysUpTime.0.
> >>
> >>
> >
> >Well, assuming you're trying to query:
> >
> > SNMPv2-MIB::sysUpTime.0
> >
> >...that should be:
> >
> >.iso.org.dod.internet.mgmt.mib-2.system.sysUpTime.0
> >
> >AKA .1.3.6.1.2.1.1.3.0
> >
> >
> >The "private enterprises" tree (eg. ucdavis, netsnmp, etc) does not come
> >with an "uptime" equivalent that I know of... though you have things
> >like swap and cpu in there, along with a couple other IO data points.
> >
> >(you can always do an snmpwalk of MIBs... though it's best that you
> >redirect that to a file for later perusing... *wink*)
> >
> > snmpwalk -c community -O f host.domain.tld .
> >
> >Hope that helps...
> >Russell
> >
> >
> >
> >
>
|