Re: [snips-users] snmpmon-collector and cisco for uptime

["Allan P. Magmanlac" <allan magmanlac at nrns.ca>]

Thanks for the reply. I was able to find the full correct identifier and 
it's working now.

Also, is there a way I can use snips package to monitor if all the lines 
in the dts are busy. Users use up all the lines by dialing in.
Or is there a way I can use snips to determine the number of users who 
are currently dialed in to our dialup terminal server?

Russell Van Tassell wrote:

> On Fri, Apr 22, 2005 at 11:05:39AM -0400, Allan P. Magmanlac wrote:
>  
>
> > Hello,
> >   I'm trying to query our dialup terminal access server using snmp 
> > packages that comes with snips.
> > It works from the command line.
> > server# ./snmpget dts.fakedomain.ca fakecommunity system.sysUpTime.0
> > Name: system.sysUpTime.0 -> Timeticks: (34057798) 3 days, 22:36:17
> >
> >  [...]
> >
> > I modified a little bit the snmpmon-collector...
> > $MIBENTERPRISE = ".iso.org.dod.internet.private.enterprises"
> > In the "sub init_system"  I specified
> > my $prefix = "$MIBENTERPRISE"
> >
> > [...]
> >
> > My question is what is the full correct identifier for system.sysUpTime.0.
> >    
>
> Well, assuming you're trying to query:
>
>   SNMPv2-MIB::sysUpTime.0
>
> ...that should be:
>
> .iso.org.dod.internet.mgmt.mib-2.system.sysUpTime.0
>
> AKA .1.3.6.1.2.1.1.3.0
>
>
> The "private enterprises" tree (eg. ucdavis, netsnmp, etc) does not come
> with an "uptime" equivalent that I know of... though you have things
> like swap and cpu in there, along with a couple other IO data points.
>
> (you can always do an snmpwalk of MIBs... though it's best that you
> redirect that to a file for later perusing... *wink*)
>
> 	snmpwalk -c community -O f host.domain.tld .
>
> Hope that helps...
> Russell
>
>
>  

--

--
Allan P. Magmanlac
allan magmanlac at nrns.ca
NRNS Incorporated
DREnet Network Coordination Centre (NCC)
Tel: (613) 599-7860 ext 107