Hi Michael,
I have also had this problem. I could not find a solution so I am still
using NOCOLv4.2.2.
If you do find a solution please let me know and I could try out SNIPS.
Thanks,
Steve Daltrey
Network Engineer
Operations
Telecity London
www.telecity.net
-----Original Message-----
From: Michael Dipper [mailto:md at lf net]
Sent: Tuesday, January 08, 2002 4:32 PM
To: snips-users at navya com
Subject: [snips-users] Thresholds in snmpgeneric
Hi,
I have a problem with snmpgeneric in snips-1.1:
While this config works fine:
TEMP 192.168.1.2 .1.3.6.1.4.1.2606.1.1.1.0 TEMP public 26 28 30
This one doesn´t work:
PRI 192.168.1.3 .1.3.6.1.2.1.2.2.1.8.2 STATUS public 2 2 2
It seems that snips can´t handle the case when the thresholds for
warning, error and critical are equal although otherwise indicated
in the sample-config. The output goes to "critical" for any
snmpget-output, even if it is just "1".
What I want to reach is to have an OK for output "1" and a
CRITICAL for anything higher.
--
Gruss / Best regards | LF.net GmbH | fon +49 711 90074-27
Michael Dipper | Ruppmannstr. 27 | fax +49 711 90074-33
md at LF net | D-70565 Stuttgart | http://www.lf.net
DISCLAIMER
This e-mail is intended only for the use of the addressees named above and
may be confidential. If you are not an addressee you must not read it and
must not use any information contained in nor copy it nor inform any person
other than TeleCity Limited or the addressees of its existence or contents.
If you have received this email and are not a named addressee, please delete
it and notify the TeleCity IT department on 0161 226 7643 or by email at
techsupport at telecity co.uk.
|