Hi,
I have a problem with snmpgeneric in snips-1.1:
While this config works fine:
TEMP 192.168.1.2 .1.3.6.1.4.1.2606.1.1.1.0 TEMP public 26 28 30
This one doesn´t work:
PRI 192.168.1.3 .1.3.6.1.2.1.2.2.1.8.2 STATUS public 2 2 2
It seems that snips can´t handle the case when the thresholds for
warning, error and critical are equal although otherwise indicated
in the sample-config. The output goes to "critical" for any
snmpget-output, even if it is just "1".
What I want to reach is to have an OK for output "1" and a
CRITICAL for anything higher.
--
Gruss / Best regards | LF.net GmbH | fon +49 711 90074-27
Michael Dipper | Ruppmannstr. 27 | fax +49 711 90074-33
md at LF net | D-70565 Stuttgart | http://www.lf.net
|