Greetings!
recently I decided to dive into snips again after running nocol
for a few years, tonight I thought to take a stab at snmpmon.
the problem I have is it does not appear to be storing all the
variables in /tmp/snmpmon_data. running snmpmon-collector in
debug mode shows it running snmpwalk on a bunch of different
variables(and it gets results back), but they don't show up
in the file..
I must admit the documentation for this monitor is quite
difficult to understand!!
my snmpmon-conf (with the comments removed):
POLLINTERVAL 300
RRDTOOL ON
HOST.uptime * 600 300 120
HOST.cpuload * 60 75 90
HOST.phymem_%used * 80 90 95
HOST.virtual_%used * 60 70 80
HOST.proctable_%used * 50 40 30
HOST.storage_%used * 75 85 95
STARTDEVICES
gateway public host
(I had to change the above HOST.storage entry because snmpmon was
complaining it didn't exist, previously it was HOST.diskspace_%used
running snmpmon-collector in debug gives me:
[..]
(debug) readconfig Device gateway, variables =
.iso.org.dod.internet.mgmt.mib-2.25.1.1,
.iso.org.dod.internet.mgmt.mib-2.25.1.6,
.iso.org.dod.internet.mgmt.mib-2.25.1.7,
.iso.org.dod.internet.mgmt.mib-2.25.2.3.1.3,
.iso.org.dod.internet.mgmt.mib-2.25.2.3.1.4,
.iso.org.dod.internet.mgmt.mib-2.25.2.3.1.5,
.iso.org.dod.internet.mgmt.mib-2.25.2.3.1.6,
.iso.org.dod.internet.mgmt.mib-2.25.3.3.1
(dbg) doping return for gateway =1
(debug) Monitoring device gateway
(debug) running /usr/local/snips/bin/snmpwalk gateway public
.iso.org.dod.internet.mgmt.mib-2.25.1.1
Stored nvarval{.iso.org.dod.internet.mgmt.mib-2.25.1.1} = (43965606) 5 days,
2:07:36
(debug) running /usr/local/snips/bin/snmpwalk gateway public
.iso.org.dod.internet.mgmt.mib-2.25.1.6
Stored nvarval{.iso.org.dod.internet.mgmt.mib-2.25.1.6} = 213
(debug) running /usr/local/snips/bin/snmpwalk gateway public
.iso.org.dod.internet.mgmt.mib-2.25.1.7
Stored nvarval{.iso.org.dod.internet.mgmt.mib-2.25.1.7} = 0
(debug) running /usr/local/snips/bin/snmpwalk gateway public
.iso.org.dod.internet.mgmt.mib-2.25.2.3.1.3
Stored nvarval{.iso.org.dod.internet.mgmt.mib-2.25.2.3.1.3} = / /dev/pts /boot
/nfs2 Real Memory Swap Space Memory Buffers
(debug) running /usr/local/snips/bin/snmpwalk gateway public
.iso.org.dod.internet.mgmt.mib-2.25.2.3.1.4
Stored nvarval{.iso.org.dod.internet.mgmt.mib-2.25.2.3.1.4} = 4096 1024 1024
4096 1024 1024 256
(debug) running /usr/local/snips/bin/snmpwalk gateway public
.iso.org.dod.internet.mgmt.mib-2.25.2.3.1.5
Stored nvarval{.iso.org.dod.internet.mgmt.mib-2.25.2.3.1.5} = 23911275 0 14119
6097752 970956 999856
(debug) running /usr/local/snips/bin/snmpwalk gateway public
.iso.org.dod.internet.mgmt.mib-2.25.2.3.1.6
Stored nvarval{.iso.org.dod.internet.mgmt.mib-2.25.2.3.1.6} = 7185542 0 1159
4594124 567900 0
(debug) running /usr/local/snips/bin/snmpwalk gateway public
.iso.org.dod.internet.mgmt.mib-2.25.3.3.1
Stored nvarval{.iso.org.dod.internet.mgmt.mib-2.25.3.3.1} = .0.0
(debug) Running procdata_host for device gateway
UNKNOWN var .iso.org.dod.internet.mgmt.mib-2.25.2.3.1.4, nvarval 4096
Sleeping for 300...
but the data file for this only reveals:
TIME 1035432926 Wed Oct 23 21:15:26 2002
DEVICE gateway
HOST.uptime 7327 SECS
HOST.storage_%used 30 VALUE /
(I manually erase the data files between restarting snmpmon-collector
to be totally sure the datafile is new). Not sure where it gets 30%
from for my / partition it is 31% full(I tried running df for
blocksizes of 512,1024,2048,4096 and they all say 31% full, my other
local partition is 9% full and I have a nfs mount 80% full)
no matter what I have done(been playing with it for about 2 hours)
I can't get it to display more then that(I can get it to display
less though!)
snmpmon correctly updates the stats/datafiles for the web front
end for the 2 stats(uptime/storage).
running snips 1.1 on debian 3.0.
I have ippingmon, nsmon, rpcmon, smbmon and portmon running
successfully.
any ideas?
thanks !!
nate
(tryin to learn new things while I look for a job ..)