|
Thanks for your help,
I want to make you another question, how can recevie traps in snips,
what is the configuration
Alexandra
Vikas Aggarwal wrote:
Alexandra Alvarado wrote:
Can you be more specific in the configuration of
snips, example:
1.- Is it normal?, I would like have only one entry with the name "alexandra"
and in it, see all the messages, actually when i enter in each "alexandra
link" i can see the same "general graphs" information
#
Status Device Name Address
Variable/ Value DownAt Monitor
Updates
2 Critical
alexandra xx.xx.xx.xx
Portmapper= 0 11/20 16:21
rpcpingmon
3 Critical
alexandra xx.xx.xx.xx
Thruput= 0
11/20 20:15 tpmon
7 Critical
alexandra xx.xx.xx.xx
NEWSport= 0 11/20 16:35
portmon
8 Info
alexandra xx.xx.xx.xx
SMTPport= 0 11/21
9:5 portmon
In snips, each 'test' is on a separate line and not grouped together for
each device. You put all the devices you want to monitor using PINGMON
in the ippnigmon config file and so on.
2.-
Have i configure one entry for each server and each port of the server
that i have to check in "portmon" file or exist any other options with
SNIPS?
3.- I have a cisco
router 3600, i don't understand how to configure it to appear in
the monitor
Just put its IP address in the ippingmon and other config files and restart
the monitor.
4.- I would like use
hostmon, but i don't know how to use it?
Run hostmon-client on your host computers, and hostmon on the snips host.
5.- How to configure
snmp traps?
Try running snmptrapd.
Thanks
Alexandra
|